Simple SSD Connection
Are you looking to add 2.5″ SSDs (solid state drives) to your storage pool? The problem is that if you want to install them in your desktop computer or multi-drive storage system, you can not utilise them straight out of the box—they’re too small. Sonnet’s Transposer is the answer you need—it adjusts any 2.5″ form factor SATA SSD (or hard drive) to any 3.5″ form factor drive tray, without cables or hassles. Transposer enables you to readily add SSDs to your system.
How Does It Work?
Just plug in the smaller drive to the Transposer’s mating connector, secure the drive with the provided screws and then connect the Transposer/drive assembly like you would any 3.5″ drive. Offering a tailor-made fit, this Sonnet adapter fortifies the 2.5″ drive from the bottom, making Transposer compatible with drives from 7mm to 15mm tall. Typical position mounting holes on Transposer’s bottom and sides, equivalent to those found on a 3.5″ hard drive, give you the flexibility to mount it anyplace a 3.5″ drive is utilised.
Transposer Offers A Firm Base To Secure Your Hard Drive Or SSD
Its particularly planned open-frame aluminium heatsink design brings effective heat dissipation, which is imperative for preserving the long-term dependability of high-performance hard drives and SSDs. Transposer’s fixed mount connectors are committed to a modest circuit board, guaranteeing solid connections amongst devices and the external connector is positioned to plug into a backplane as the tray is implanted.
Undiminished Speed And Compatibility
Other rewards of this modest design comprise great undiminished speed and compatibility. Transposer is well-matched with 3Gb/s and 6Gb/s SATA SSDs and hard disk drives. Since no bridge chip is required, Transposer does not cause any loss in data transfer speeds. Transposer takes the speculation out of firmly acclimatising a 2.5″ SSD for use in 3.5″ drive tray— and it simply just works!
- No loss in data transfer speeds—no bridge chip required.
- Well-matched with 3Gb/s and 6Gb/s SATA SSDs and hard disk drives.
- Successfully conducts and convects away heat to help preserve the long-term dependability of high-performance SSDs and hard drives.
- Can be utilised anywhere a 3.5″ drive is typically utilised, including computer drive bays and side or bottom mount drive enclosure trays.
- Adapts any 2.5″ SATA SSD or hard drive for use in any 3.5″ drive tray.
Versatile Mounting Solution
Transposer acclimatises 7mm to 15mm 2.5″ SSD drives to any 3.5″ drive tray. Typical position mounting holes on the bottom of Transposer allow you to install an SSD drive into a Mac Pro hard drive carrier. Side mount position holes provide proper mounting positions for a wide assortment of drive trays, such as those utilised in Sonnet Fusion storage systems.