Manfrotto MVK502AQ Spreaderless Video Tripod With MVH502A Fluid Head Tripod Attachment.

Description

Light Aluminum Alloy Structure With Autonomously Locking Legs

Manfrotto’s MVT535AQ Aluminum Tripod Legs with 75mm Bowl combines a light aluminum alloy structure with autonomously locking legs to deliver a set of tripod legs that feature a 75mm bowl and support 20kgs of discretionary video head and camera.

The included 60mm bowl adaptor slips into place and is fastened into pre-tapped holes in the 75mm bowl casting. The tripod features a spreaderless design with each leg being able to move autonomously of the others. The locking leg angle selections hold each leg in place until you change its position, with the flip locks permitting you to autonomously alter the height of each leg.

The flip locks are changeable, permitting you to stiffen them in order to offset any slippage or slackness, which is not unusual with flip locks. The legs integrate metal spike for additional grip on soft surfaces such as;

• Rocky terrain
• Dirt
• Sand

Rubber Spike Covers For Improved Grip

When at work on delicate, slippery or hard surfaces you can spin-down the rubber spike covers for improved grip. The aluminum structure and four section/three stage design delivers a sturdy set of legs, able to support 20kgs of head and camera, while weighing approximately 3.2 kgs. The legs feature autonomously selectable locking angles of 70, 50 or 23 degrees providing for sturdy support and placement without utilising a spreader. The feet integrate metal spikes, which are most useful on rocky terrain, dirt or beaches. When at work on interiors, tough or delicate surfaces you can spin-down rubber spike covers which afford additional grip on these surfaces than the metal spikes and will offer scratch protection to most gentle surfaces.

The flip style leg locks are appropriate for swiftly releasing or tightening the legs. A fine-tuning key committed to one of the legs, lets you stiffen the locks should they wear over time.

An Inexpensive Yet Remarkably Full Featured Professional Head

The Manfrotto 502A Pro Video Head with 75mm Half Ball is an inexpensive yet remarkably full featured professional head that signifies an upgrade over the popular 501HDV, with a robust structure and a half ball for accurate levelling on an equivalent tripod. The 502A comes in two versions—the “A” ball-base version such as this one and the “AH” flat-base version which is discretely obtainable.

Intended For Completing Cinematic Moves With Compacted Camcorders & DSLR Video Cameras

Featuring Manfrotto’s patented bridging technology (inherited from the 509 and 504 heads), the 502A is intended for completing cinematic moves with compacted camcorders and DSLR video cameras. The weight limit is 7kgs and offset supports up to 4kgs. The balance plate’s 8.3cm range permits you to adjust for patchy payloads that might be due to matte boxes or exotic DSLR rig formations.

The Pan Friction Control Is Instinctive And Simple To Set

The bridging technology guarantees that the pan friction control is instinctive and simple to set nonetheless also protected against knocks.There are autonomous locks for pan and tilt and drag for both is selectable in a constant range from zero to the max level. This permits you to work the head in an assured, even style utilising the included pan bar.For video tripods with 75mm half balls, the 75mm half ball attaches to the equivalent bowl in a tripod.

Pan drag and tilt drag are continuously changeable from 0 (no drag) to the maximum level. Sliding rapid release plate secured by secondary safety system.

Appropriate For Cameras Weighing Up To 7kgs

With its spring-loaded counterbalance system and variable pan/tilt fluid drag, Manfrotto’s MVK502AQ Spreaderless Video Tripod with MVH502A Fluid Head Tripod Attachment is appropriate for cameras weighing up to 7kgs. The head stands on the solitary tube four section three stage legs, permitting you to utilise the MVH502A that is offered with the bundle and in the future upgrade to a discretionary heftier head, while utilising the same legs. The legs by themselves can support a little bit more than 20kgs and feature a spreaderless design for speedy set-up and pack-down. The legs feature stiffness changeable flip locks so you can stiffen the locks if they should slacken over time.