Showing 1–9 of 11 results
- Sale!
DJI Ronin 3 Axis Brushless Gimbal Stabiliser in Case
The Ronin 3-Axis Brushless Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 16 pounds, Ronin uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and boasts a precision of control of ±0.02°. An IMU (inertial measurement movement) detects movement and engages the motors to react, using algorithms to differentiate between intentional movement such as pans and tracking shots from unwanted shake. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.$3,099.00$2,979.00 Add to cart -
DJI Ronin MX
The Ronin-MX has been designed to carry many of the cameras used every day on sets worldwide, and SmoothTrack™ algorithms ensure movements are smooth in every configuration. A repositioned battery improves balance while stability is enhanced by a camera cage that locks mounted cameras in place at the top and at the bottom. Silent motors prevent on set mics picking up motor noise.Read more -
DJI Ronin S Essentials Kit
$769.00 Add to cart- Superior 3-Axis Stabilisation
- 3.6 kg Tested Payload Capacity
- Camera Control
- Pro Accessory Compatibility
- Fine Focus Control
- Automated Smart Features
- Angled Roll Motor
- Sale!
DJI Ronin S Standard Kit
- Superior 3-Axis Stabilisation
- 3.6 kg Tested Payload Capacity
- Camera Control
- Pro Accessory Compatibility
- Fine Focus Control
- Automated Smart Features
- Angled Roll Motor
$1,099.00$1,049.00 Add to cart - Sale!
DJI Ronin SC Camera Stabilizer DSLR Gimbal
- Designed specifically for mirrorless cameras
- Produce expert footage effortlessly
- Assembled to go anywhere
- Ultra lightweight new design
- Attain entirely unique shots
$569.00$549.00 Add to cart -
DJI Ronin SC Pro Combo Camera Stabilizer DSLR Gimbal
$709.00 Add to cart- Designed specifically for mirrorless cameras
- Produce expert footage effortlessly
- Assembled to go anywhere
- Fast follows, abrupt motions and whole fluctuations in direction
- Attain entirely unique shots
- Focus Motor x 1
- Focus Motor Rod Mount x 1
- Focus Wheel x 1
- Focus Gear Strip x 1
- Screw x 6
- RSS Splitter x 1
-
DJI Ronin-M 3 Axis Handheld Gimbal Stabiliser
The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 3.6 kg, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105? up / 165? down plus a roll range of ±110?. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable. Supports Cameras up to 3.6 kg Precision of Control: ±0.02° Transmitter for Remote Pan/Tilt Control Tool-Less Balance Adjustment System Assistant Software for iOS and Windows Bluetooth Wireless Interface for Setup Silent Mode For Quiet Operation USB and PowerTap Power Outputs Comes with 2x 1580mAh BatteriesRead more - Sale!
DJI Ronin-S Part 17 Focus Motor
- Ronin-S Focus Motor is used with the Ronin-S Focus Wheel
- Control the focus, iris, and zoom
$289.00$264.00 Add to cart -
Glidecam HD-2000 Stabilizer System for Low-Profile Cameras (0.9 – 2.7kg)
The Glidecam HD2000 is a lightweight, hand-held camcorder stabilizing system. This system is upgraded from the 2000 Pro and offers fine adjustments and an improved gimbal and balance system. Each HD-Series Stabilizer’s offset, foam cushioned, Handle Grip is attached to a free floating, three axis Gimbal. This allows your hand to move up and down, and side-to-side, thereby isolating your hand’s unwanted motions from the camera. This up and down movement alleviates the bouncing, pogo type action often associated with our competitor’s system because their handle cannot move up and down. This design feature, coupled with the overall higher inertia of the HD-Series systems, produces superior stabilization when compared with our competition. Glidecam HD-2000 Stabilizer System for Low-Profile Cameras (0.9 - 2.7kg) has been discontinued and is no longer available for order. Please see here for direct replacement model:$799.00 Add to cart
